MM-609
In-charge Unit (AP-531)
A leading Engineering, Procurement and Construction (EPC) Company specializing in Fabrication, Construction and Maintenance Services for Refinery / Petrochemical / Oil & Gas / Turnaround Projects in Middle East.
Job Description:
ASIAPOWER OFFICE TIMING: 10.00 AM TO 5.00 PM (MON TO SAT)

-Degree in Engineering with minimum 8 to 10 years experience in Refinery / Petrochemical / Oil & Gas / Turnaround Projects.
-Unit In charge is a key position who ensures that all the Site works are timely and safely executed.
-Should be trained on the Work Permit Performer course conducted by COMPANY.
-Should be aware of the ‘Permit to Work’ procedure.
-Should be aware of all the permits required for safe execution of the job. 
-Prepare the various Work Permits prior to the Turnaround as per the work scope requirements :
-Cold Work Permit (CW) for Isolation, Man way opening and Ventilation 
-Cold Work Permit (CW) based on the work scope  
-Hot Work Permit (HW) based on the work scope
-Confined Space Work Permit (CS) based on the work scope
-Should be aware of the QA/QC requirements for each of the equipment.
-Should be fully aware of the scope in his unit(s).
-Should be aware of the job sequence (level 4) for each of the equipment.
-Should be aware of the Flange Assembly Tightening Record (FTR) requirements, list down all the flanges relevant to his work package, fill-in the required details in the FTR documents during pre-Turnaround and ensure that the FTR requirements are compiled and FTR records are duly maintained by his Supervisors (or Bolt torqueing/tensioning Supervisors) during the execution of Turnaround.   
-Should be aware of all TRAs applicable for his scope.
-Should receive permits for all works and ensure all TRAs are available inside container.
-Should ensure that all the permits are kept on the Permit box and the respective permit boxes are to be placed closer to the respective equipment work areas.
-Should extend permits as required to ensure job continuity with minimum idle time.
-Responsible for any permit violation.
-Guide his supervisors with regard to the work sequence.
-Ensure his area Inspection coordinator is closely following up the QA/QC requirement for each of the equipment.
-Ensure all the relevant work stages are offered to COMPANY personnel and the stage-wise approval is received on the box-up certificate from the concerned Department.
-Proactively ensure the availability of all the spares and materials for each of the equipment.
-Ensure that the right gaskets and materials are used in his area/equipment.
-Shall have a list of spares required for all his equipment to be inspected.
-Shall be responsible for withdrawing the right material from Contractor’s material container.
-Ensure that all gaskets and COMPANY’S materials are stored properly at site after withdrawal from the material store container.
-Responsible for any damage to spares noticed at site.
-Ensure “fit to use” scaffolding tagging is available where applicable.
-Ensure proper housekeeping in his area.
-Constantly be in touch with his Supervisors ensuring job safety and progress at all time.
-Ensure all the safety watches in his area are vigilant.
-Ensure that safety talks are given by his supervisor to his crew on a daily basis.
-Shall instruct his supervisor with regard to the TRA applicable for the job.
-Shall apply for road closure permits if any equipment or crane or work is obstructing flow of traffic in that road.
-Should be aware of roads that need road closure permits if obstruction is foreseen.
-Handover his jobs to the night shift in-charge with key instruction. 
-Ensure that fin-fan hydro-jetting is done without water spillage to the ground. 
-Should be available at his area till the final housekeeping, insulation fixing etc. is completed and get the area handover certificate from COMPANY operation.
-Coordinate his works with other contractors work so that there is no conflict and delay
-Ensure that all materials for his unit are withdrawn ahead of time and store adequately and used correctly in the respective equipment during Turnaround. Any material not utilized to be communicated to COMPANY representative.
-Shall ensure that all the sub-contractors for his unit are available, when the work front is available.
-Any repeat works done due to the inadequate quality and improper handling / execution done will be accountable to the Unit In-charge.
-All Inspection Work Lists (IWLs) issued against equipment in the unit shall be immediately, effectively and safely implemented after obtaining necessary approvals. Any discrepancy on the same should be brought immediately to the notice of COMPANY representative.
-Ensure IWLs are quantified, feedbacks given and the approvals received from the   Planning Dept. before starting of work.
-Ensure safe working practices are employed at his area.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area:
Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization:
Service/Maintenance Engnr
Service/Maintenance Supervisor
Minimum Work Experience:
8 Years
Maximum Work Experience:
10 Years
Age:
Not Specified To: Not Specified
Qualification:
B.Tech/B.E.
Remuneration:
To View
 
 * Non Priority Jobseeker Candidates Should Visit Our Office For Shortlisting
Placement Fees:
To View
 
 * Non Priority Jobseeker Candidates Should Visit Our Office For Shortlisting
Location:
U.A.E
Other Information:

Chennai Office:

Asiapower Overseas Employment Services
28, Aarti Arcade,
86, Dr. Radhakrishna Road, Mylapore,
Chennai - 600 004. INDIA.
Tel : ( 0091 - 44 ) 2811 4437 / 4347 0600
Fax : ( 0091 - 44 ) 2811 1390

Delhi Office:

Asiapower Overseas Employment Services
Bldg No. 9, 2nd Floor,
Sant Nagar ,East Of Kailash,
Above Magma Office (Near Vodaphone Store),
New Delhi - 110065.
INDIA.
Tel : ( 0091 - 11 ) 49904880

Kochi:

C/O Jomer Arcade, 3rd Floor,
South Junction, Chittoor Road,
Opp. Girls High School,
Kochi - 682016.
INDIA.
Tel : (0484) 4149999
Fax : (0484) 4044520

Bangladesh Office:

AOES (Asiapower Overseas Employment Services) Bangladesh Ltd.
Plot # 413 (JL # 294),
Naya Nagar (Dhali Bari),
PO: Gulshan,
PS: Badda
Dhaka-1213.

Nepal Office:

Asiapower Overseas Nepal Pvt Ltd.
Post Box: 24742,
Gairidhara, Kathmandu, Nepal,
License number: 590/062/063.

Vadodara:

C/O Office No 105, 1st Floor, Imperial Heights,
Akshar Chowk, Old Padra Road,
Vadodara, Gujarat - 390015. INDIA.
Tel: 0265-2984567 / +91 9033065310

 
  • Hot Employers
  • Locations
  • Current Employers
  • Jobseeker Database





Birth Date:
Aug 1 1989
City:
KALYAN
Qualification:
B.TECH/B.E.
Employer:
danem engineering works,qatar
Designation:
mechniacal area coordinator
Curr. Salary:
QAR 8,000.00 PM
Exp. Salary:
AED 6,000.00 PM
Total Exp.:
India 2 Yrs. and 0 Mth.
Overseas 8 Yrs. and 3 Mth.
 
Birth Date:
Jul 20 1987
City:
BAGERHAT, KHULNA
Qualification:
DIPLOMA
Employer:
Power Mech project Limited
Designation:
Assistant Manager
Curr. Salary:
INR 11,00,000.00 PA
Exp. Salary:
INR 15,00,000.00 PA
Total Exp.:
India 10 Yrs. and 0 Mth.
Overseas 1 Yrs. and 5 Mth.
 
Birth Date:
Aug 5 1986
City:
MUSCAT
Qualification:
B.TECH/B.E.
Employer:
INTERTEK INSPEC OMAN
Designation:
Multi Discipline QA/QC Engineer
Curr. Salary:
OMR 1,150.00 PM
Exp. Salary:
OMR 1,200.00 PM
Total Exp.:
India 1 Yrs. and 9 Mth.
Overseas 8 Yrs. and 5 Mth.
 
Birth Date:
Feb 14 1980
City:
NAGERCOIL
Qualification:
B.TECH/B.E.
Employer:
HYUNDAI ENGINEERING & CONSTRUCTION
Designation:
QA/QC PIPING AND WELDING INSPECTOR
Curr. Salary:
USD 1.00 PM
Exp. Salary:
USD 1.00 PM
Total Exp.:
India 6 Yrs. and 0 Mth.
Overseas 7 Yrs. and 5 Mth.
 
Birth Date:
May 4 1991
City:
PALAKKAD
Qualification:
B.TECH/B.E.
Employer:
SUNGCHANG ENGINEERING AND CONSTRUCTION LTD
Designation:
QC WELDING INSPECTOR AND DOCUMENT CONTROLLER
Curr. Salary:
USD 1,200.00 PM
Exp. Salary:
USD 1,500.00 PM
Total Exp.:
India 3 Yrs. and 0 Mth.
Overseas 5 Yrs. and 1 Mth.
 
Birth Date:
Jun 29 1986
City:
SURAT
Qualification:
B.TECH/B.E.
Employer:
M/S. GODREJ & BOYCE MFG.CO.LTD
Designation:
ELECTRICAL ENGINEER
Curr. Salary:
INR 7,60,000.00 PA
Exp. Salary:
INR 1,50,000.00 PM
Total Exp.:
India 10 Yrs. and 0 Mth.
Overseas 0 Yrs. and 0 Mth.
 
Birth Date:
Sep 29 1994
City:
PERAMBALUR
Qualification:
B.TECH/B.E.
Employer:
General datum product design pvt ltd
Designation:
Senior Engineer
Curr. Salary:
INR 39,000.00 PM
Exp. Salary:
AED 4,000.00 PM
Total Exp.:
India 4 Yrs. and 4 Mth.
Overseas 0 Yrs. and 0 Mth.
 
Birth Date:
Jul 27 1993
City:
MADURAI
Qualification:
DIPLOMA
Employer:
Hi tech civil care system
Designation:
Civil supervisor
Curr. Salary:
INR 15,000.00 PM
Exp. Salary:
INR 50,000.00 PM
Total Exp.:
India 3 Yrs. and 1 Mth.
Overseas 4 Yrs. and 0 Mth.
 
Birth Date:
Oct 1 1971
City:
THANE
Qualification:
DIPLOMA
Employer:
Designation:
Curr. Salary:
Exp. Salary:
Total Exp.:
India 22 Yrs. and 0 Mth.
Overseas 6 Yrs. and 0 Mth.
 
Birth Date:
Dec 17 1991
City:
TRICHY
Qualification:
B.TECH/B.E.
Employer:
Nasser Al . S . Hariri cooperation
Designation:
QC Inspector(ARAMCO APPROVED WELDING Inspector )
Curr. Salary:
INR 12,00,000.00 PA
Exp. Salary:
INR 14,00,000.00 PA
Total Exp.:
India 2 Yrs. and 2 Mth.
Overseas 5 Yrs. and 4 Mth.
 
Birth Date:
Jan 31 1972
City:
BHUBANESWAR
Qualification:
M.A
Employer:
GSENC
Designation:
HSE Supervisor
Curr. Salary:
AED 12,000.00 PM
Exp. Salary:
AED 15,000.00 PM
Total Exp.:
India 14 Yrs. and 0 Mth.
Overseas 11 Yrs. and 0 Mth.
 
Birth Date:
May 30 1988
City:
OACHIRA
Qualification:
B.A
Employer:
Designation:
Curr. Salary:
Exp. Salary:
Total Exp.:
India 2 Yrs. and 5 Mth.
Overseas 7 Yrs. and 0 Mth.
 
Birth Date:
Jul 14 1964
City:
TRICHY
Qualification:
DIPLOMA
Employer:
Applus velosi
Designation:
QC Coating
Curr. Salary:
SAR 8,500.00 PM
Exp. Salary:
USD 2,500.00 PM
Total Exp.:
India 7 Yrs. and 0 Mth.
Overseas 19 Yrs. and 0 Mth.
 
Birth Date:
Mar 1 1978
City:
KOLKATA
Qualification:
B.SC
Employer:
Nasser s. Al Hajri
Designation:
HSE Manager
Curr. Salary:
KWD 900.00 PA
Exp. Salary:
USD 3,500.00 PA
Total Exp.:
India 4 Yrs. and 9 Mth.
Overseas 11 Yrs. and 10 Mth.
 
Birth Date:
Jul 15 1997
City:
ARIYALUR
Qualification:
DIPLOMA
Employer:
Quality control services co Ltd
Designation:
NDT TECHNICIAN
Curr. Salary:
SAR 2,500.00 PM
Exp. Salary:
SAR 5,000.00 PM
Total Exp.:
India 2 Yrs. and 1 Mth.
Overseas 2 Yrs. and 3 Mth.
 
Birth Date:
Jul 16 1992
City:
MUMBAI
Qualification:
DIPLOMA
Employer:
Larsen & Toubro construction - Heavy Civil - Metro,Bridges
Designation:
Senior Engineer
Curr. Salary:
INR 8,00,000.00 PA
Exp. Salary:
INR 15,00,000.00 PA
Total Exp.:
India 3 Yrs. and 0 Mth.
Overseas 6 Yrs. and 0 Mth.
 
Birth Date:
May 13 1981
City:
9894067651
Qualification:
PG DIPLOMA
Employer:
North oil Company-Qatar, Offshore, 28/28
Designation:
Senior Electrical Technician
Curr. Salary:
INR 1,50,000.00 PM
Exp. Salary:
INR 2,00,000.00 PM
Total Exp.:
India 10 Yrs. and 0 Mth.
Overseas 9 Yrs. and 0 Mth.
 
Birth Date:
Aug 10 1980
City:
TRICHY
Qualification:
B.TECH/B.E.
Employer:
AL TASNIM AL TURKI
Designation:
SENIOR SITE ENGINEER
Curr. Salary:
OMR 550.00 PM
Exp. Salary:
INR 1,50,000.00 PM
Total Exp.:
India 14 Yrs. and 0 Mth.
Overseas 9 Yrs. and 0 Mth.
 
Birth Date:
Sep 1 1981
City:
PONDICHERRY
Qualification:
DIPLOMA
Employer:
Designation:
Curr. Salary:
Exp. Salary:
Total Exp.:
India 3 Yrs. and 0 Mth.
Overseas 8 Yrs. and 8 Mth.
 
Birth Date:
May 1 1988
City:
KOLLAM
Qualification:
B.TECH/B.E.
Employer:
Almabani General Contractors
Designation:
QA/QC Engineer
Curr. Salary:
SAR 9,000.00 PM
Exp. Salary:
SAR 12,000.00 PM
Total Exp.:
India 4 Yrs. and 0 Mth.
Overseas 2 Yrs. and 2 Mth.