Your position:CS Resistor>Modified Yellow PTFE Gasket Sheet with Silica>Requirement of feed grade zinc oxide.

silicone thermal grease

【Applicable material】:thermal paste compound, yeast,silicone thermal grease, paper pulp, residue slag and other wastes.
【Optional fuel】:Steam, conduction oil, and hot water. Higher the potential heat and temperature are, the higher thermal efficiency will be.
【Material moisture】:80%-25%.
【Application range】:thermal conductive compounds, chemical industry, petroleum,Two Part Dispensing Equipment.

Two Component Dispensing.Two-component dispensing system, rotating shaft, shell (Solder Paste Formulation),Soldering Paste.Thermal grease,silicone thermal grease. The main body is installed horizontally (or inclined). Material enters dryer from the front end and shell form a slight inclination angle with horizontal plane and rotating shaft. The product moves to the discharge end relying on its own weight along with rotation of the rotating shaft. At the discharge end, product flows out of the equipment through overflow port and enters the next process.cheap thermal paste,thermal paste/high-quality thermal compound.

thermal grease at best price, reaction, cooling, crystallization, evaporation, heating and disinfection, and low-temperature calcination.silicone thermal grease. One machine can fulfill multiple purposes.

  According to different heat exchange media,cheap thermal paste, steam (saturated steam or superheated steam) type and liquid (hot water, heat conduction oil,PCB thermal paste, refrigerant, soft cold water or chilled water) type.silicone thermal grease.Thermal grease(steam, heat conduction oil or water) is always separated from product.Thermal gel, it is divided into single shaft,Thermal gel. According to different operating pressure, it is divided into vacuum, normal pressure and positive pressure type.

Computer Thermal Pads for Sale.Thermall Pad for UPS. Heat exchange surface has self-cleaning function.Adhesive Sealant,Electronic Silicone’ surface so that rotating shaft always maintains a clean heat transfer surface during operation.


Multiple operation mode: 

Silicone Elastomer, chemical, petrochemical, dye,CPU thermal paste. Characteristics of heat transfer, cooling, and stirring of the equipment enable it to complete following unit operations: cooling,Thermal grease(solvent recovery), heating (melting), reaction and sterilization.Thermal grease, which increases heat transfer area in unit effective volume and shortens processing time. Wedge-thermal paste-cleaning function.UV Glue. Material moves in a "piston flow" along axial direction. In axial interval, gradient of materials’ temperature, humidity,Two-component dispensing system.
  Specifically, it can operate: calcium sulfate dehydrate (Ca2SO4•2H2O) is burned into calcium sulfate hemihydrate (Ca2SO4•1/22H2O); sodium bicarbonate (NaHCO3) is converted into soda ash (Na2HCO3) after calcination.Silicone Rubber Factory, cooling brine and etc. For example, blade-type alkali cooling machine used in soda ash industry replaces old air-cooled alkali cooling machine, which saves energy consumption, reduces exhaust gas treatment equipment and decreases operating costs.Pourable Silicone Rubber,Factory Wholesale Silicone Potting Compound, which makes energy consumption and environmental control in an ideal easy handling state. It has been widely used in fine chemical, petrochemical and dye industries.

Applicable material:
â—ŽPetrochemical industry: polyolefin powder, polycarbonate resin, high and low density polyethylene, linear low density polyethylene, polyacetal particles, nylon 6, nylon 66, nylon 12, cellulose acetate, polyphenylene sulfide, propylene Base resin, engineering plastic, polyvinyl chloride, polyvinyl alcohol, polystyrene, polypropylene, polyester, polyoxymethylene, styrene-acrylonitrile copolymer, and ethylene-propylene copolymer.
â—ŽEnvironmental protection industry:Silicone Elastomer,Adhesive Sealant Silicone, boiler soot, pharmaceutical factory waste residue, sugar factory waste residue, MSG factory waste residue and coal ash.
â—ŽFeed industry: soy sauce residue, bone-based feed, distiller's grains, food scraps, apple pomace, orange peel, soybean meal, chicken bone feed, fish meal, feed additives and biological residue mud.
â—ŽFood industry: starch, cocoa beans, corn kernels, salt, modified starch and medicines.
â—ŽChemical industry: soda ash, nitrogen, phosphorus and potassium compound fertilizer, kaolin, bentonite, white carbon black, carbon black, phosphogypsum, sodium fluoride oxide, calcium nitrate, magnesium carbonate, sodium cyanide, aluminum hydroxide, barium sulfate, calcium sulfate, Calcium carbonate, dyes, molecular sieves, and saponin.

Techncial Advantage

Vehicle Gps Tracker

â—ŽLow energy consumption:Due to indirect heating, there is no large amount of air taking away heat. Outer wall of dryer is equipped with insulation layer. For slurry materials, it only consume 1.2kg of vapor to evaporate 1kg water.
â—ŽRTV Adhesive Silicone:Unit effective volume has a huge heat transfer surface, which shortens the processing time and reduces the equipment size. Meanwhile, greatly building area and space are greatly reduced.
â—ŽWide range of processing materials:RTV Sealant, it can process heat-sensitive materials as well as materials that require high-temperature processing.RTV Silicone Sealant: steam, heat conduction oil, hot water, cooling water and etc. It can be operated both continuously and intermittently. It can be applied for many fields.
â—ŽLess environmental pollution:No carrying air is used and less dust materials are entrained. Evaporation of material solvent is very small, which is easy to handle. For materials which may cause pollution or working conditions that require solvent recovery, closed loop can be used.
â—ŽLow operating cost:Reasonable structure, less abrasion amount and low maintenance cost.
â—ŽStable operation:Due to compression-expansion and stirring effect of special wedge-Fast-curing Adhesive, material particles are fully in contact with heat transfer surface. In axial interval, gradient of materials’ temperature, humidity,Adhesive Sealant Glue, thereby ensuring the process stability.

  Wedge-Waterproof LED Adhesive.RTV Silicone TS6602. It can be both steam and liquid such as hot water, heat conduction oil and etc. For indirect conduction heating condition, heat is all used to heat materials. Heat loss is only caused by heat dissipation to the environment through insulation layer of dryer. Wedge-thermal paste-cleaning function. Relative movement between material particles and wedge-shaped surface produces scrubbing effect, which can wash away attached material on the wedge-shaped surface so that a clean heat transfer surface is always maintained during operation.Adhesive Bonding for LED. Dryer shell is set with sealed end cover and upper cover to prevent material dust leakage.

High Strength RTV Glue.Fast Curing LED RTV Silicone Sealant.RTV Adhesive Sealant for LED Lighting Free Sample Available:

Parameter

23250-0H060
ModelKGX3KGX9KGX13KGX18KGX29KGX41KGX52KGX68KGX81KGX95KGX110
Heat transfer area(m2)391318294152688195110
Effective volume(m3)0.060.320.591.091.852.83.965.216.438.079.46
OEM/ODM Available Free Sample LED Lighting RTV Silicone Sealant(rmp)15-3010-2510-2510-2010-2010-2010-2010-205-155-155-10
Power(kw)2.245.57.511153045557595
Width of body A(mm)3065847629401118129614761652182820322210
Total width B(mm)736841106613201474167618542134118624382668
Width of body C(mm)19562820304833284114472452585842602061246122
Length of body D(mm)29724876548659186808757083069296967897049880
Distance of feedind and discharging E(mm)17522540276830483810442049545384556256645664
Center height F(mm)38038053461076291510661220122012201220
Total height H(mm)762838109212701524177820322362246425662668
Air inlet (inch)3/43/4111111/211/211/211/22
Water oulet (inch)3/43/4111111/211/211/211/22

Taida Company has three registered trademarks, 中联泰达,ZONELION and TAEDA. We focuses on providing technical supports and services for various Water Companies and Wastewater Treatment Plants.Free Sample Available RTV Silicone Sealant for LED Lighting OEM/ODM Factory Price.

Taeda concept: Profession, Efficiency, Innovation and Cohesion

Taeda Culture: Whatever is worth doing at all is worth doing well.

Whatever is worth doing well is worth doing happily.

SMD Red Glue,High Adhesive Strength Red Glue.

STIBINE

Taeda always put people at first place. It adheres to fair distribution principle and build talent mechanism which combines competition with encouragement. It leads a road to cooperate with universities. Cultivate talents while utilizing talents. It devotes to cultivate all-round talents with good skills and management abilities in order to forge a famous brand and strong enterprise.

Processing Ability

  • 乔家大院之旅Welding Platform
  • 篮球比赛增进友谊Drilling Machine
  • 大型歌唱晚会Edge Milling Machine
  • 员工风采Vertical Lathe
  • Rolling Machine

Relevant cases

    Leave Message

    If you are interested in our company or products,Red Glue Epoxy Resin Adhesives.High Quality SMD Red Glue. Meanwhile, We will get in touch with you as soon as possible for further discussion.

    • Product:
    • Name:
    • Email:
    • Usage Region:
    • Your Demand:
    • Fill in verification code:high-quality thermal compound

    ZONELION® TAEDA®. Address of headquarters:High-tech zone, zhengzhou city, ChinaOne Piece Complete Autoloader