700G Vacuum Suction Machine.400G Vacuum Suction Machine, rotating shaft, shell (300G Vacuum Suction Machine),800KG European Style Stainless Steel Dryer.600KG European Style Stainless Steel Dryer,400KG European Style Stainless Steel Dryer. The main body is installed horizontally (or inclined). Material enters dryer from the front end and shell form a slight inclination angle with horizontal plane and rotating shaft. The product moves to the discharge end relying on its own weight along with rotation of the rotating shaft. At the discharge end, product flows out of the equipment through overflow port and enters the next process.25KG European Style Stainless Steel Dryer,1000KG Plastic Dryer/800KG Plastic Dryer.

600KG Plastic Dryer, reaction, cooling, crystallization, evaporation, heating and disinfection, and low-temperature calcination.400KG Plastic Dryer. One machine can fulfill multiple purposes.

　　According to different heat exchange media,300KG Plastic Dryer, steam (saturated steam or superheated steam) type and liquid (hot water, heat conduction oil,100KG Plastic Dryer, refrigerant, soft cold water or chilled water) type.75KG Plastic Dryer.24KW 350 Degree High Temperature Mold Machine(steam, heat conduction oil or water) is always separated from product.18KW 350 Degree High Temperature Mold Machine, it is divided into single shaft,12KW 350 Degree High Temperature Mold Machine. According to different operating pressure, it is divided into vacuum, normal pressure and positive pressure type.

36KW Oil Type Mold Temperature Controller.24KW Oil Type Mold Temperature Controller. Heat exchange surface has self-cleaning function.9KW Oil Type Mold Temperature Controller,36KW 180℃ Water Mold Temperature Controller’ surface so that rotating shaft always maintains a clean heat transfer surface during operation.

Multiple operation mode:　

24KW 180℃ Water Mold Temperature Controller, chemical, petrochemical, dye,18KW 180℃ Water Mold Temperature Controller. Characteristics of heat transfer, cooling, and stirring of the equipment enable it to complete following unit operations: cooling,9KW 180℃ Water Mold Temperature Controller(solvent recovery), heating (melting), reaction and sterilization.24KW Water Mold Temperature Controller, which increases heat transfer area in unit effective volume and shortens processing time. Wedge-18KW Water Mold Temperature Controller-cleaning function.30HP Water-cooled Box Chiller. Material moves in a "piston flow" along axial direction. In axial interval, gradient of materials’ temperature, humidity,10HP Water-cooled Cannon Chiller.
　　Specifically, it can operate: calcium sulfate dehydrate (Ca2SO4•2H2O) is burned into calcium sulfate hemihydrate (Ca2SO4•1/22H2O); sodium bicarbonate (NaHCO3) is converted into soda ash (Na2HCO3) after calcination.100HP Water-cooled Screw Chiller, cooling brine and etc. For example, blade-type alkali cooling machine used in soda ash industry replaces old air-cooled alkali cooling machine, which saves energy consumption, reduces exhaust gas treatment equipment and decreases operating costs.60hp Water-cooled Screw Chiller,50HP Air-cooled Screw Chiller, which makes energy consumption and environmental control in an ideal easy handling state. It has been widely used in fine chemical, petrochemical and dye industries.

Applicable material:
â—ŽPetrochemical industry: polyolefin powder, polycarbonate resin, high and low density polyethylene, linear low density polyethylene, polyacetal particles, nylon 6, nylon 66, nylon 12, cellulose acetate, polyphenylene sulfide, propylene Base resin, engineering plastic, polyvinyl chloride, polyvinyl alcohol, polystyrene, polypropylene, polyester, polyoxymethylene, styrene-acrylonitrile copolymer, and ethylene-propylene copolymer.
â—ŽEnvironmental protection industry:25HP Open Chiller,20HP Open Chiller, boiler soot, pharmaceutical factory waste residue, sugar factory waste residue, MSG factory waste residue and coal ash.
â—ŽFeed industry: soy sauce residue, bone-based feed, distiller's grains, food scraps, apple pomace, orange peel, soybean meal, chicken bone feed, fish meal, feed additives and biological residue mud.
â—ŽFood industry: starch, cocoa beans, corn kernels, salt, modified starch and medicines.
â—ŽChemical industry: soda ash, nitrogen, phosphorus and potassium compound fertilizer, kaolin, bentonite, white carbon black, carbon black, phosphogypsum, sodium fluoride oxide, calcium nitrate, magnesium carbonate, sodium cyanide, aluminum hydroxide, barium sulfate, calcium sulfate, Calcium carbonate, dyes, molecular sieves, and saponin.

â—ŽLow energy consumption:Due to indirect heating, there is no large amount of air taking away heat. Outer wall of dryer is equipped with insulation layer. For slurry materials, it only consume 1.2kg of vapor to evaporate 1kg water.
â—Ž15HP Open Chiller:Unit effective volume has a huge heat transfer surface, which shortens the processing time and reduces the equipment size. Meanwhile, greatly building area and space are greatly reduced.
â—ŽWide range of processing materials:10HP Open Chiller, it can process heat-sensitive materials as well as materials that require high-temperature processing.5HP Air-cooled Box Chiller: steam, heat conduction oil, hot water, cooling water and etc. It can be operated both continuously and intermittently. It can be applied for many fields.
â—ŽLess environmental pollution:No carrying air is used and less dust materials are entrained. Evaporation of material solvent is very small, which is easy to handle. For materials which may cause pollution or working conditions that require solvent recovery, closed loop can be used.
â—ŽLow operating cost:Reasonable structure, less abrasion amount and low maintenance cost.
â—ŽStable operation:Due to compression-expansion and stirring effect of special wedge-30hp Air-cooled Shell And Tube Chiller, material particles are fully in contact with heat transfer surface. In axial interval, gradient of materials’ temperature, humidity,20HP Air-cooled Shell And Tube Chiller, thereby ensuring the process stability.

　　Wedge-5HP Air-cooled Shell And Tube Chiller.10HP Air-cooled Plate Exchange Chiller. It can be both steam and liquid such as hot water, heat conduction oil and etc. For indirect conduction heating condition, heat is all used to heat materials. Heat loss is only caused by heat dissipation to the environment through insulation layer of dryer. Wedge-18KW Water Mold Temperature Controller-cleaning function. Relative movement between material particles and wedge-shaped surface produces scrubbing effect, which can wash away attached material on the wedge-shaped surface so that a clean heat transfer surface is always maintained during operation.8HP Air-cooled Plate Exchange Chiller. Dryer shell is set with sealed end cover and upper cover to prevent material dust leakage.

2HP Air-cooled Plate Exchange Chiller.10HP Air-cooled Hot And Cold Integrated Machine.8HP Air-cooled Hot And Cold Integrated Machine: