800KG European Style Stainless Steel Dryer.600KG European Style Stainless Steel Dryer, rotating shaft, shell (400KG European Style Stainless Steel Dryer),25KG European Style Stainless Steel Dryer.1000KG Plastic Dryer,800KG Plastic Dryer. The main body is installed horizontally (or inclined). Material enters dryer from the front end and shell form a slight inclination angle with horizontal plane and rotating shaft. The product moves to the discharge end relying on its own weight along with rotation of the rotating shaft. At the discharge end, product flows out of the equipment through overflow port and enters the next process.600KG Plastic Dryer,400KG Plastic Dryer/300KG Plastic Dryer.
100KG Plastic Dryer, reaction, cooling, crystallization, evaporation, heating and disinfection, and low-temperature calcination.75KG Plastic Dryer. One machine can fulfill multiple purposes.
ããAccording to different heat exchange media,24KW 350 Degree High Temperature Mold Machine, steam (saturated steam or superheated steam) type and liquid (hot water, heat conduction oil,18KW 350 Degree High Temperature Mold Machine, refrigerant, soft cold water or chilled water) type.12KW 350 Degree High Temperature Mold Machine.36KW Oil Type Mold Temperature Controller(steam, heat conduction oil or water) is always separated from product.24KW Oil Type Mold Temperature Controller, it is divided into single shaft,9KW Oil Type Mold Temperature Controller. According to different operating pressure, it is divided into vacuum, normal pressure and positive pressure type.
36KW 180℃ Water Mold Temperature Controller.24KW 180℃ Water Mold Temperature Controller. Heat exchange surface has self-cleaning function.18KW 180℃ Water Mold Temperature Controller,9KW 180℃ Water Mold Temperature Controller’ surface so that rotating shaft always maintains a clean heat transfer surface during operation.

Multiple operation mode:ã
24KW Water Mold Temperature Controller, chemical, petrochemical, dye,18KW Water Mold Temperature Controller. Characteristics of heat transfer, cooling, and stirring of the equipment enable it to complete following unit operations: cooling,30HP Water-cooled Box Chiller(solvent recovery), heating (melting), reaction and sterilization.10HP Water-cooled Cannon Chiller, which increases heat transfer area in unit effective volume and shortens processing time. Wedge-100HP Water-cooled Screw Chiller-cleaning function.60hp Water-cooled Screw Chiller. Material moves in a "piston flow" along axial direction. In axial interval, gradient of materials’ temperature, humidity,50HP Air-cooled Screw Chiller.
ããSpecifically, it can operate: calcium sulfate dehydrate (Ca2SO4•2H2O) is burned into calcium sulfate hemihydrate (Ca2SO4•1/22H2O); sodium bicarbonate (NaHCO3) is converted into soda ash (Na2HCO3) after calcination.25HP Open Chiller, cooling brine and etc. For example, blade-type alkali cooling machine used in soda ash industry replaces old air-cooled alkali cooling machine, which saves energy consumption, reduces exhaust gas treatment equipment and decreases operating costs.20HP Open Chiller,15HP Open Chiller, which makes energy consumption and environmental control in an ideal easy handling state. It has been widely used in fine chemical, petrochemical and dye industries.
Applicable material:
âPetrochemical industry: polyolefin powder, polycarbonate resin, high and low density polyethylene, linear low density polyethylene, polyacetal particles, nylon 6, nylon 66, nylon 12, cellulose acetate, polyphenylene sulfide, propylene Base resin, engineering plastic, polyvinyl chloride, polyvinyl alcohol, polystyrene, polypropylene, polyester, polyoxymethylene, styrene-acrylonitrile copolymer, and ethylene-propylene copolymer.
âEnvironmental protection industry:10HP Open Chiller,5HP Air-cooled Box Chiller, boiler soot, pharmaceutical factory waste residue, sugar factory waste residue, MSG factory waste residue and coal ash.
âFeed industry: soy sauce residue, bone-based feed, distiller's grains, food scraps, apple pomace, orange peel, soybean meal, chicken bone feed, fish meal, feed additives and biological residue mud.
âFood industry: starch, cocoa beans, corn kernels, salt, modified starch and medicines.
âChemical industry: soda ash, nitrogen, phosphorus and potassium compound fertilizer, kaolin, bentonite, white carbon black, carbon black, phosphogypsum, sodium fluoride oxide, calcium nitrate, magnesium carbonate, sodium cyanide, aluminum hydroxide, barium sulfate, calcium sulfate, Calcium carbonate, dyes, molecular sieves, and saponin.