5HP 250T 4KW Crusher.40HP 800V 30KW Crusher, rotating shaft, shell (20HP 600V 15KW Crusher),15HP 500V 11KW Crusher.10HP 400V 7.5KW Crusher,7.5HP 300V 5.5KW Crusher. The main body is installed horizontally (or inclined). Material enters dryer from the front end and shell form a slight inclination angle with horizontal plane and rotating shaft. The product moves to the discharge end relying on its own weight along with rotation of the rotating shaft. At the discharge end, product flows out of the equipment through overflow port and enters the next process.50HP 1000F 37.5KW Crusher,40HP 800F 30KW Crusher/15HP 500F 11KW Crusher.

7.5HP 300F 5.5KW Crusher, reaction, cooling, crystallization, evaporation, heating and disinfection, and low-temperature calcination.5HP 250F 4KW Crusher. One machine can fulfill multiple purposes.

　　According to different heat exchange media,700G Vacuum Suction Machine, steam (saturated steam or superheated steam) type and liquid (hot water, heat conduction oil,400G Vacuum Suction Machine, refrigerant, soft cold water or chilled water) type.300G Vacuum Suction Machine.800KG European Style Stainless Steel Dryer(steam, heat conduction oil or water) is always separated from product.600KG European Style Stainless Steel Dryer, it is divided into single shaft,400KG European Style Stainless Steel Dryer. According to different operating pressure, it is divided into vacuum, normal pressure and positive pressure type.

25KG European Style Stainless Steel Dryer.1000KG Plastic Dryer. Heat exchange surface has self-cleaning function.800KG Plastic Dryer,600KG Plastic Dryer’ surface so that rotating shaft always maintains a clean heat transfer surface during operation.

Multiple operation mode:　

400KG Plastic Dryer, chemical, petrochemical, dye,300KG Plastic Dryer. Characteristics of heat transfer, cooling, and stirring of the equipment enable it to complete following unit operations: cooling,100KG Plastic Dryer(solvent recovery), heating (melting), reaction and sterilization.75KG Plastic Dryer, which increases heat transfer area in unit effective volume and shortens processing time. Wedge-24KW 350 Degree High Temperature Mold Machine-cleaning function.18KW 350 Degree High Temperature Mold Machine. Material moves in a "piston flow" along axial direction. In axial interval, gradient of materials’ temperature, humidity,12KW 350 Degree High Temperature Mold Machine.
　　Specifically, it can operate: calcium sulfate dehydrate (Ca2SO4•2H2O) is burned into calcium sulfate hemihydrate (Ca2SO4•1/22H2O); sodium bicarbonate (NaHCO3) is converted into soda ash (Na2HCO3) after calcination.36KW Oil Type Mold Temperature Controller, cooling brine and etc. For example, blade-type alkali cooling machine used in soda ash industry replaces old air-cooled alkali cooling machine, which saves energy consumption, reduces exhaust gas treatment equipment and decreases operating costs.24KW Oil Type Mold Temperature Controller,9KW Oil Type Mold Temperature Controller, which makes energy consumption and environmental control in an ideal easy handling state. It has been widely used in fine chemical, petrochemical and dye industries.

Applicable material:
â—ŽPetrochemical industry: polyolefin powder, polycarbonate resin, high and low density polyethylene, linear low density polyethylene, polyacetal particles, nylon 6, nylon 66, nylon 12, cellulose acetate, polyphenylene sulfide, propylene Base resin, engineering plastic, polyvinyl chloride, polyvinyl alcohol, polystyrene, polypropylene, polyester, polyoxymethylene, styrene-acrylonitrile copolymer, and ethylene-propylene copolymer.
â—ŽEnvironmental protection industry:36KW 180℃ Water Mold Temperature Controller,24KW 180℃ Water Mold Temperature Controller, boiler soot, pharmaceutical factory waste residue, sugar factory waste residue, MSG factory waste residue and coal ash.
â—ŽFeed industry: soy sauce residue, bone-based feed, distiller's grains, food scraps, apple pomace, orange peel, soybean meal, chicken bone feed, fish meal, feed additives and biological residue mud.
â—ŽFood industry: starch, cocoa beans, corn kernels, salt, modified starch and medicines.
â—ŽChemical industry: soda ash, nitrogen, phosphorus and potassium compound fertilizer, kaolin, bentonite, white carbon black, carbon black, phosphogypsum, sodium fluoride oxide, calcium nitrate, magnesium carbonate, sodium cyanide, aluminum hydroxide, barium sulfate, calcium sulfate, Calcium carbonate, dyes, molecular sieves, and saponin.

â—ŽLow energy consumption:Due to indirect heating, there is no large amount of air taking away heat. Outer wall of dryer is equipped with insulation layer. For slurry materials, it only consume 1.2kg of vapor to evaporate 1kg water.
â—Ž18KW 180℃ Water Mold Temperature Controller:Unit effective volume has a huge heat transfer surface, which shortens the processing time and reduces the equipment size. Meanwhile, greatly building area and space are greatly reduced.
â—ŽWide range of processing materials:9KW 180℃ Water Mold Temperature Controller, it can process heat-sensitive materials as well as materials that require high-temperature processing.24KW Water Mold Temperature Controller: steam, heat conduction oil, hot water, cooling water and etc. It can be operated both continuously and intermittently. It can be applied for many fields.
â—ŽLess environmental pollution:No carrying air is used and less dust materials are entrained. Evaporation of material solvent is very small, which is easy to handle. For materials which may cause pollution or working conditions that require solvent recovery, closed loop can be used.
â—ŽLow operating cost:Reasonable structure, less abrasion amount and low maintenance cost.
â—ŽStable operation:Due to compression-expansion and stirring effect of special wedge-18KW Water Mold Temperature Controller, material particles are fully in contact with heat transfer surface. In axial interval, gradient of materials’ temperature, humidity,30HP Water-cooled Box Chiller, thereby ensuring the process stability.

　　Wedge-10HP Water-cooled Cannon Chiller.100HP Water-cooled Screw Chiller. It can be both steam and liquid such as hot water, heat conduction oil and etc. For indirect conduction heating condition, heat is all used to heat materials. Heat loss is only caused by heat dissipation to the environment through insulation layer of dryer. Wedge-24KW 350 Degree High Temperature Mold Machine-cleaning function. Relative movement between material particles and wedge-shaped surface produces scrubbing effect, which can wash away attached material on the wedge-shaped surface so that a clean heat transfer surface is always maintained during operation.60hp Water-cooled Screw Chiller. Dryer shell is set with sealed end cover and upper cover to prevent material dust leakage.

50HP Air-cooled Screw Chiller.25HP Open Chiller.20HP Open Chiller: